Trying to locate a copy of UH1-93-01R3 or later. If anyone can point me in the right direction, I would GREATLY appreciate it! Can't get hold of Garlick or Rotorcraft Development, unfortunately. Thank you!

Our company is cleaning out a warehouse that has a bunch of parts for UH-1B and UH-1H. Please contact me at rbanuelos@aristaas.com if you are interested..

Where can we get a cargo mirror from for a UH1H?

Looking for any pictures or demensions of the small hanger bearing repack tool. I used to have one any years ago made out of plexiglass; I donated as I was retiring fromt he Army. Thank You, Angelo

Do you have a copy of UH-1-12-AMAM-02 available, we are trying to use it to inspect the tail boom longerons for the 25hr requirement? Does anyone have this AMAM that they could get us a copy of, either that or if there was more recent documentation that complies with the 25hr requirement describ

We have bought a UH-1B to be mounted in our Patriots Park at Noccalula Falls Park in Gadsden... While in transit our right side cowling was lost. We would appreciate any help in finding one at a cost we could afford. We support our Patriots as a non-profit organization. This unit was flying up unt

An operator is seeking used spray system for UH-1. If you have a tank/spray equipment available for sale please email us at uh1ops@gmail.com.

I am looking to purchase a set of 204-011-250-113 blades, hopefully around 700 hours of remaining time, with records. Is there anyone out there that can help me out?

i am looking for XM-23 Door gun mounts which would have been used on H/D models. also looking for any aircraft armament compnents including XM-21 arms etc. will also pay finders fee for anyone who can point me in the right direction to aquire said items. Aaron - Mohnton, Pa Sales@Bel

We have a county government organization in search of a rescue hoist for a UH-1 aircraft. Anyone have one for sale? Please Contact uh1ops@gmail.com subject line Rescue Hoist. Thank you!

We need your help! Hi all. Following the loss of our huey to another buyer- we need to find another aircraft for our veterans memorial here in Ireland. Nearly 3,000 Irish citizens served with US Forces in Vietnam- many of them pilots and aircrew! The proposed 'Listowel Huey' would be a permanent mem

We are looking to purchase two documents which we are having a difficult time locating. Maybe your sources could assist us in obtaining the following documents which we are willing to pay for. TM 55-2995-213-40 "Maintenance Procedures" TM 1-7R-1-33 has to do with engine oil coolers Kimberly Gu

My name is Will, I work for The American Military Museum in South El Monte, Ca. We are a 501c3 NPO. We have in our posession, still owned by the Army, the above helocopter. It has zero airframe time left and is a display piece only, sadly never to fly again. The contract with the Army states that we

I'm trying to find out if the sales page is current or kept up at all? I'm currently looking for a UH-1B air frame or Aircraft ready to fly. Anyone have any ideas?

Good day all! I am doing research on behalf of the owner of a fully restored Heuy that is going to market and would like some assistance in evaluation,information on the model etc. The air craft is currently in South Africa the owner is putting it to market. Could you please advise whom I could con

Need a blueprint of a cockpit door showing all dimensions of sheet metal & windows for a project. Can't seem to find one online anywhere. Rick.

We are looking for two crew seats pilot and copilot seats more of a civilian seat than the uh seats any help would be much appreciated email brad@lvheli.co.nz

Hello, looking to rent UH-1, special tool #T60, wrench, retaining nut. Any info would be appreciated.

I am looking for replacement antenna parts for the bell 209-077-203 antenna. It was originally produced by Dorne & Margolin. I discussed with Harris but they nolonger make the item. Any ideas where I can locate 6 of these?

i AM HARD AT WORK SEARCHING FOR A HUEY TO SERVE AS A MEMORIAL IN FRONT OF A PROMINENT VFW POST IN NEW YORK. I HAD ONE BUT WHILE I WAS BEING MOBILIZED AND DEPLOYED RECENTLY SOMEONE STOLE IT AWAY. THIS AIRCRAFT WILL SIT IN FRONT OF A VERY ACTIVE VFW POST AND BE A CENTERPIECE ALONG WITH A TALL FLAG POL

Have a decent amount of New old Stock Gun Ship swing arm mounts. They are for the M60 Machine Gun. These are all original mounts made by the military supplier decades ago. US sales only. Will not export. $1,500 each $3,000 for a set of two. Thanks, Aaron - Mohnton, Pa Sales@BeltFeds.Com

Hello folks, I am in search for a reasonable UH-1 project or a flying one to build it up and operate it in Europe. Thanks for your help Simon

Hello, my name is Marian Madalin, mechanical engineer and aviation passionate. I am trying to open myself a small aerospace museum or open space for any kind of aircraft here in my country, in Romania. The project is entirely nonprofit and will be based exclusively on donations. It is more like a

My friends grand father was the DAC who picked up the 3000 UH-1 from the factory. Her moms house flooded and lost the photo of that magazine cover. Any chance you guys have that picture of could point me in the right direction? I am looking for the cover photo as well as the story if at all possi

Does anyone have a link or copy they could email me with this change? Thank you.

Looking for a crashworthy fuel tank! Anyone got a useable one they would like to sell? This is the Left Hand Tank. Thank you!