wsknettl
Apr 23, 2017

Crashworthy fuel system components

1 comment

I cannot locate any repair/service data for these parts in the Army TM's. They are very poorly illustrated in the IPLs. I am working on a 1960's UH-1H with these crashworthy fittings. In particular at this point a leaky lower feed fitting at the bottom of the right rear fuel cell. It is item 11 in TM 55-1520-210-23P-2 (Chg 16) figure 328 page 1360. Can anyone point me towards more detailed guidance on removal and repair of this coupling? PN 205-062-653-1

wsknettl
Apr 23, 2017

 

 

0
New Posts
  • nascargraham
    3 days ago

    Main Rotor part number suffix

    we have a set of 205-015-150-101 blades. One of the blades has a "D" suffix at the end of the part number. What does the "D" mean. Can you fly it with a regular 101. Where would I find the approval or nonapproval verbiage
  • tata_bambi
    Dec 2

    Different dimensions of Main Rotor Blade (MB)

    Good day to all! I am one of the personnel maintaining UH-1H and we have 30 UH1s in our fleet. Does anybody have ideas or references why the Main rotor (metal) blades we procure and use has differences in weight and length? We are encountering problems on the matching of Main rotor blades as this will cause aircraft vibration. Some blades have different locations on where the trim tab is located. We will greatly appreciate your response. tata_bambi@yahoo.com
  • Plane Pieces Inc
    Oct 2

    T53 Vane Blade Help

    I have recently found a bunch of New Old Stock T53 Vane blades marked Huey Engine 1967. The part number is 1-140-211-16 - some with 16N. I have looked through a ton of T53 manuals but cannot find this part. If anyone has any information or a diagram showing this piece I would be very grateful and would be happy to send you a vane blade in return for your help. Attached is a photo of one. Thank You RT