Unintended Load Release Solution
- Peter Frinchaboy
- Mar 9, 2020
- 1 min read
There have been many unintended external load releases over the years and here is a simple way to reduce that number. Install this recessed ring around the button so you have to push into the recess to push the button.
There are a few different ones I have seen. The particular one in the picture is Part Number 10C1015-1 look it up on the internet. There are a couple of places that have them, usually for less than $2.00. Little to pay for what could be a costly release in the end.

Hi
Do you perhaps have the Part Number for the switch itself. The part number above 10C1015-1 is only for the button guard. On the UH-1H, the part number for the switch is MS25089-4AR, and does not have threads to screw the button guard on.
Many thanks
Rob